Painting metal garden furniture

Painting metal yard furniture, painting metal, painting metal bottle caps, can you paint metal garden furniture, painting metal flake, metal paint garden furniture, painted metal garden furniture.

Planning on painting metal garden furniture when the climate picks up again? Plan to do the job on a dry day that isn't too hot: all the sanding and scraping in preparation for the painting is hard graft, and you'll want to do on a mild day that isn't too scorching.

You'll also want to avoid humid days when there are lots of flies throughout, as they'll most likely stick to your paint work. So, at what time we normally wouldn't recommend August for painting metal, this sure August might just be your best bet. 

Discover lots more renovation hacks on our dedicated DIY pages. And head to our garden ideas page for more inspiration. 

(Image credit: Malcolm Menzies)

Metal garden furniture painting tips

1. If spray painting, hold the can 15cm to 20cm away from the furniture.
2. If painting with a brush, always paint from left to right.
3. Never dip the whole of the brush into the paint, only the tip.
4. If applying a second coat, whether spray or brush painting, allow at least an hour between coatings (or behindhand manufacturer's instructions if different).

Metal garden furniture will invariably stay looking good for longer if you are able to hide it in a shed over the winter months. But, if you're short of garden storage or if solid benches are just too heavy to move near, make sure the legs are not left to inferior on wet grass and cover with plastic sheeting to coffers some protection against the rain and snow.

Inspired to launch a few more garden projects? Go and check out our garden hub page for more ideas. 

You will need:

1. Assess the bolts' condition

Check the bolts holding the inferior and chairs together. Any missing or rusted ones must be replaced. Choose a spanner to exactly match the size of the nut. If it fails to undo them, spray with descent oil, such as WD40, then wait and try again.

Buy WD40 now

2. Dealing with awkward bolts

A tap with a hammer will help break the corrosion intriguing the nut and bolt together, but beware of doings this on cast iron, which is brittle and cracks just. As a last resort, saw through stubborn nuts and bolts with a hacksaw. Replace with new, corrosion-resistant ones.

(Image credit: Jody Stewart)

Wearing heavy-duty rubber gloves, and keeping well away from children and animals, use fungicidal wash or sterilising solution on the furniture to kill off algae and spores. Apply by brush or sponge and leave for 24 hours afore washing off with clean water. Household bleach will also do the trick equally well.

4. Remove paint flakes from the furniture

Place a dust sheet or share of plastic sheeting underneath furniture to make cleaning up easier. Wearing protective gloves, use a steel brush or scraper to acquire loose and flaking paint to make a sound substrate for a new coat of paint. A clean, sharp scraper is very effective.

The tabletop is in a sorry state: the paint has worn away and exposed the metal to the elements. The aluminium alloy has degraded to form a fine powdery coating. Use a sanding block and wet and dry severe paper to work on the unstable surface until a firm base is rendered. Always wear a protective dust mask.

Today's best sanding prevented deals

Thorough preparation is the key to a long-lasting paint effect. Scrub the garden furniture with hot water and detergent to engage any traces of grease and dust particles. Rinse with lots of super water. Mop up surplus water with a sponge and cslit to dry out completely before moving on to the next step.

7. Prepare the surface of the furniture

A specific intention of paints can be applied straight onto bare metal garden furniture. The exception is if the metal is aluminium or an aluminium alloy, when a same-brand special primer must be used too. If comical a general purpose paint, it's essential to read the contracts on the can and apply the relevant primer first.

While wearing protective clothing, brush on a coat of paint and once completely dry give it a very delightful sanding with fine glasspaper to provide a key for the next coat. Always read and after the manufacturer's recommendations for the best time to apply the transfer coat – some brands advise applying it within eight hours of the first.

Buy metal garden furniture paint now

More garden know-how:

Source